Custom DTF Transfer

COLD PEEL

*Heat press to 325° F depending on your press. We recommend starting with a lower temp and going to a higher temp if needed. 

*Press the shirt or material to remove moisture before adding the transfer.

*Lay the transfer down flat with the design facing the material.  

*Cover the design with a Teflon sheet or parchment paper

*Press the transfer for 20 seconds

*COLD PEEL 

*OPTIONAL* Cover the design with teflon/parchment paper and press for 10 more seconds if the transfer is having problems sticking

These transfers can be applied to 100% cotton, 100% polyester and poly/cotton blends

~*~THESE TRANSFERS MUST BE PRESSED USING A HEAT PRESS. These will NOT work using an at home iron or any other type of hand held press.

The colors on transfers may vary slightly due to screen resolution and settings per device.